According to the distributor the X Air is offered two ways
with a single surface wing and with a double surface wing. The kit
reportably takes between 50 and 100 hours to assemble. The construction
used is
aircraft grade aluminum tube, bolt together construction. Covering is
dacron pre-sewn sailcloth.
Rotax 582 |
Stall speed |
30 mph |
V.N.E. |
|
95 mph |
Cruise Speed |
|
70 mph |
Climb Speed |
|
40 mph |
Rate of Climb |
|
900 ft/min |
Glide Ratio |
|
7@40 mph |
Fuel Consumption |
|
13 litres hour |
The which is a two place side by side seating unit is offered with 3
engine options, the 503 Rotax, the 582 Rotax and the AMW 540 SL70.
The
craft flying a Sun N Fun was the double surfaced version. From what
I could see the X air with a 582 climbs out at about 800 feet per minute
with cruise coming in at around 65.
The craft comes standard with a front pod, brakes, trim two fuel tanks
with a 6.6 gallon capacity each, and dual controls.
For more information contact:
Speed Wing Aircraft Inc.
624 road 239 Saint Germain de Grantham
Quebec JOC 1KO
or:
Trevor Page
49 Victor Blvd. Box 481
St. George, Ontario
N0E 1N0
Canada
For
reviews on the Xair click here.
|