Stabilizer Fin Mod Hardware Kit
(For Challengers flying with doors installed)
If you check the accident data on Ultralight News you will find quite a few Challengers
involved in accidents when flying with DOORS installed.
Pilot after pilot reports the fact
that the plane's flight characteristics change completely - that you have to be on the
controls all the time and that rudder control is less effective.
For
more information click here!
This kit helps eliminate
some of the adverse yaw problem associated with flying a Challenger with doors installed.
All Hardware Included (1/8" 16x16 fins not included)
- 4-AN3-14A Bolts
- 4-Locknuts
- 4-Nylon Saddles
- 8-Oversize AN970 washers
- Instruction Sheet
Aluminum or plywood stock available for fin material, call, price not
determined as of 1/97
David Dolata
N8383 Hill Road
Ripon, WI 54971
In England other modification include a larger rudder,
vertical stabilizer, and dorsal fin.
Challenger II with the UK-style vertical fin, rudder and dorsal fin. |