Kitfox elevator control stop bushings, Kitfox service advisory 38. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
|
||||||||||||
|
SERVICE
LETTER #38 DATE:
September 12, 1994 SUBJECT:
Elevator Control Stop Bushings APPLICABILITY:
All Series 5 Aircraft with S/N's prior to V9410XXXX, S9410XXXX COMPLIANCE:
As required FROM:
SkyStar Aircraft Engineering Department Some
Series 5 control column weldments may have been shipped with the
elevator control stop bushing welded to the wrong (inboard) side of the
column. Examine your parts
to determine if your control column was properly configured. If
your parts are incorrect, return the parts to us and we will
correct them for you. Call
Customer Service for a Return Materials Authorization number (RMA) so
that we may properly track the returned parts. The
accompanying drawing illustrates the correct and incorrect locations of
the bushing in question. Figure 1 Control
Column Elevator Stop Bushing |
||||||||||||
|
|
||||||||||||
Ultralight
Aircraft News Magazine |
|
|||||||||||
|
Ultralight Aircraft News Web Magazine Covering the World of Ultralight Aviation .
You may link to these pages or print
them out for your own personal use, but no part of this
publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical,
manual, or otherwise, without the written permission of Ultralight News.
By copying or paraphrasing the intellectual
property on this site, you're automatically signing a binding contract
and agreeing to be billed $10,000 payable immediately. Copyright Ultralight News . |
||||||||||||
