Kitfox cable guide weldments, Kitfox service advisory 36. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
|
||||||||||||
|
SERVICE
LETTER #36 DATE:
August 22, 1994 SUBJECT:
Cable Guides APPLICABILITY:
Series 5 Aircraft through S/N S9407xxxx; Vixens through S/N
V9407xxxx COMPLIANCE:
As required FROM:
SkyStar Aircraft Product Development Department Some
Series 5 fuselage weldments have been shipped that had the aft rudder
cable guides welded to the inside of the fuselage tubing instead of the
outside. Inspect your
fuselage to ensure that your cable guides were properly positioned.
If you find that your guides were mis-located, contact Customer
Service at 208-466-1711. We
have developed a simple retrofit kit that allows you to install cable
guides in the correct location without having to do any welding; request
P/N 10435.000. |
||||||||||||
|
|
||||||||||||
Ultralight
Aircraft News Magazine |
|
|||||||||||
|
Ultralight Aircraft News Web Magazine Covering the World of Ultralight Aviation .
You may link to these pages or print
them out for your own personal use, but no part of this
publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical,
manual, or otherwise, without the written permission of Ultralight News.
By copying or paraphrasing the intellectual
property on this site, you're automatically signing a binding contract
and agreeing to be billed $10,000 payable immediately. Copyright Ultralight News . |
||||||||||||
