KITFOX
SERVICE LETTER #1
SUBJECT:
FINGER STRAINERS
TO:
All KITFOX OWNERS
FROM:
DENNEY AEROCRAFT COMPANY
FINGER
STRAINER: Denney Aerocraft strongly recommends that a finger
strainer be installed in the outlet of the E-26 Fuel Tank. The finger
strainer (our part number E-42, Fuel Tank Outlet Screen) will help prevent
fuel flow stoppage due to foreign matter in the tank. All E-26 Fuel Tanks
manufactured now have 3/8” NPT threads formed in the tank sump. If you
have the older style with the aluminum block molded into the sump, you may
drill and tap it to 3/8”
NPT which will allow
installation of the E-42 Fuel Tank Outlet Screen. We have only experienced
about a 50%
success ratio in
drilling and tapping these older style tank outlets.
Drill
the aluminum block out to 37/64” and tap 3/8” NPT. Go very slowly and
carefully to avoid turning the block in the plastic tank, use aluminum
thread cutting fluid. If the aluminum block turns, it will destroy the
seal and the tank will be unusable. If you do ruin the tank attempting
this modification, Denney Aerocraft will sell you the new style tank at
our cost of $38.34 plus shipping.
Upon
satisfactory installation of the screen, an E-23 Fuel Line Outlet, 1/4”
NPT x 90 degree x 1/4” barbed fitting is required to complete the
connection from the screen to the E-22 Fuel Line Hose.
PARTS REQUIRED
PRICE
E-23 Fuel Line Outlet
.46
E-42 Fuel Tank Outlet Screen
8.34
E-26 Fuel Tank (if needed)
38.34
If
you need assistance in any
way, please call customer service. Before returning any items to Denney Aerocraft Co. please
obtain a Return Goods Authorization (RMA) number
from customer service.
|